Axle Yoke Bearing Inspection DITA Procedure

  1. Inspect the Axle Assy (1)IMG_001.jpg
  2. Apply WD-40 to clean the bolts (2) from rust and corrosion IMG_002.jpg
  3. Unscrew the Rod bolts (2) IMG_000.cgm
    1. Show how to unscrew bolt (2) with the wrench
    2. Unscrew other bolts (2)
  4. Remove the Axle Back Cover (3) with the screwdriver IMG_000.cgm
  5. Unscrew the Axle Shells' bolts (4) IMG_000.cgm
    1. Remove one Bolt (4) and Washer (5) with Torque Wrench
    2. Remove other Bolts (4) and Wasers (5)
  6. Remove Shells (6) IMG_000.cgm
  7. Take out the Axle (7) to Rod Cover (8) and inspect the Bearing (9), replace if needed IMG_000.cgm