ISOBus Installation Procedure

  1. Install the ISOBus Power Pack.

    1. Install the Power Pack Mounting and the ISOBus Pack.
    2. Connect the Master Electrical System to Position 5 of the ISOBus Pack with a Data Cable.
  2. Install the Monitor.

    1. Install the Monitor on the Cabin Mount.
    2. Install the Cable Clips on the Frame.
    3. Connect the Monitor to Position 4 of the ISOBus Pack using a Data Cable. The cable should be secured to the frame using the Cable Clips.
  3. Install the Antenna.

    1. Install the Antenna on the cabin roof.
    2. Install the Cable Clips on the Frame.
    3. Connect the Antenna to Position 3 of the ISOBus Pack using a Data Cable. The cable should be secured to the frame using the Cable Clips.
  4. Install the Front ISOBus Connector.

    1. Install the ISOBus Front Bracket and ISOBus Connector on the front of the vehicle.
    2. Connect the Front ISOBus Connector Power Socket to Position 2 of the ISOBus Pack using a Power Cable.
    3. Connect the Front ISOBus Connector Data Socket to Position 1 of the ISOBus Pack using a Data Cable.
  5. Install the Rear ISOBus Connector.

    1. Install the ISOBus Rear Bracket and ISOBus Connector on the rear of the vehicle.
    2. Connect the Rear ISOBus Connector Data Socket to Position 7 of the ISOBus Pack using a Data Cable.
    3. Connect the Rear ISOBus Connector Power Socket to Position 6 of the ISOBus Pack using a Power Cable.
  6. Turn on the Monitor to test ISOBus installation.
    Note: If no error messages are displayed on the Monitor, the ISOBus has been correctly installed.